#nobridge
If it’s a good old game, check if gog.com sells it. That would probably be the easiest way for a non technical user.
Many of their old games run using Dosbox, but without the end user having to set it up, f.e.
https://www.gog.com/en/game/sid_meiers_colonization
If the leaks are correct we’re talking about 120W TDP and higher power and thermal efficiency than the 7000 series of X3D CPUs.
L2 8MB, L3 96MB(32MB + 64MB) for a total of 104MB according to Toms Hardware
https://www.tomshardware.com/pc-components/cpus/extensive-amd-ryzen-7-9800x3d-specs-leak-details-unlocked-120w-cpu-with-5-2-ghz-boost-clock
Priority one for me is that the motherboard allows for BIOS Firmware updates from a USB drive without having to boot an operating system. The user manual is usually the fastest way to verify that one.
Then I would look at PCIe slots, if I bought a new motherboard today I would want to have at least one PCIe 5.0 x16 slot and one PCIe 5.0 m.2 slot.
Oh, and searching the net for people having trouble with the motherboards networking or bluetooth when running linux distros is always a good idea.
CPU
Some games benefit a lot from the large L3 cache in the X3D cpus, f.e. the AMD Ryzen 7 7800X3D. Check whether it is true for the ones you play.
GPU
I’m running an AMD 6650XT GPU in Linux without any trouble, I even use vfio to use it in a Fedora VM without errors.
RAM
Buying 2x32GB gives you enough RAM to run a bunch of VMs while gaming. 2x16GB is more than enough for a gaming rig.
their*
The first thing to check is whether you can install your CAD software on a virtual machine with your current license. If you have good internet at home and already own a CAD machine then it might be easier to setup VPN access and remote control that machine for your Windows needs. Sunshine/Moonlight works good if you have the bandwidth for it.
Interesting that Toshiba/Seagate has best 16TB stats and WDC bad ones in comparison, but for 14TB it’s reversed. My homelab disks apparently has 0.71% risk of dying after 22 months (seagate exos x16 st16000nm001g).
edit: WDC does good in 16TB too, their only outlier there could be due to low number of disks in deive count. And the same is true when checking total no of disks for 14TB.
I can only be another “everyone” and say go for a Synology. If you wanna run services on your NAS then the DSM is a godsend. The 423+ sounds like a good fit, might wanna grab a RAM upgrade for it though.
edit: As you mentioned Jellyfin - if you wanna stream video you definitely want the 423+ and not the 923+ as the AMD Ryzen R1600 lacks GPU to transcode video streams.
Thanks for the warning, I’m only familiar with his earlier works.
https://www.pcgamer.com/godus-is-deadus-peter-molyneuxs-controversial-godus-games-are-finally-being-taken-off-steam/
Alternatively, you can create new users from the command line.
This can be done as follows:
If synapse was installed via pip, activate the virtualenv as follows (if Synapse was installed via a prebuilt package, register_new_matrix_user should already be on the search path):
cd ~/synapse
source env/bin/activate
synctl start # if not already running
Run the following command:
register_new_matrix_user -c homeserver.yaml
This will prompt you to add details for the new user, and will then connect to the running Synapse to create the new user. For example:
New user localpart: erikj
Password:
Confirm password:
Make admin [no]:
Success!
This process uses a setting registration_shared_secret, which is shared between Synapse itself and the register_new_matrix_user script.
It doesn’t matter what it is (a random value is generated by --generate-config), but it should be kept secret, as anyone with knowledge of it can register users, including admin accounts, on your server even if enable_registration is false.
https://element-hq.github.io/synapse/latest/setup/installation.html
OpenWrt with 802.11r and 802.11s configured will work as a mesh network with roaming functionality.
https://openwrt.org/docs/guide-user/network/wifi/mesh/80211s
https://openwrt.org/docs/guide-user/network/wifi/roaming
Not many Ruckus devices that are supported though:
Brand - Model - Supported Version
Ruckus - ZF7025 - 23.05.2
Ruckus - ZF7321 - 23.05.2
Ruckus - ZF7341 - 23.05.2
Ruckus - ZF7343 - 23.05.2
Ruckus - ZF7351 - 23.05.2
Ruckus - ZF7352 - 23.05.2
Ruckus - ZF7363 - 23.05.2
Ruckus - ZF7372 - 23.05.2
https://openwrt.org/toh/start?toh.filter.supportedcurrentrel=22.03|23.05
Software: OpenWrt - https://openwrt.org/docs/guide-user/network/wifi/roaming
Devices: Supported devices found here - https://openwrt.org/toh/start?toh.filter.supportedcurrentrel=22.03|23.05
pfsense and opnsense are very similar. The pfsense devs has acted like jackasses towards the opnsense gang. They are both great for a router/firewall/vpn device. I would use external access points with them.
I think there are more addons to pfsense than opnsense.
OpenWrt is great when it comes to WiFi, but I find it much less intuitive to use for router/firewall parts. Could be that I am used to the way pfsense and opnsense do things.
Neither do switching from what I know, so pair the router with a switch of your choice.
I’m so happy I went with a self-hosted Forgejo for my code repo.
Next time I build a PC, I plan to spend extra on hardware that can run games decently while producing as little heat as possible. My current PC is like a space heater when it’s running and it’s unbearable to play games on it for any extended periods during the summer months.
The only reason I went for an 80+ Platinum PSU instead of an 80+ Bronze PSU is to make it generate less heat (and the fact that the platinum had a really nice price at the time). Doing it for power savings isn’t worth it, but getting a cooler case is nice.
https://www.tomshardware.com/news/what-80-plus-levels-mean,36721.html
Gonna check it out!
Is it easy to setup automatic responses to the alerts, f.e. restarting a service if it isn’t answering requests in a timely manner?
Have you used it together with Windows Servers too?
Yeah, if there’s a full system failure without any backups and no option to get the system operational again then I would land in clone the drives before trying to restore data from them.