Hmm.
I do quite a bit of parametric modelling and I see how something like this could be made. Find the angles of the sun at specific times, project planes at a fixed distance and angle matching around your cylinder, sketch the time number you want on each plane with a fixed pitch and then project-cut back through the cylinder. Would be a pain in the ass though. And a pretty tough 3d print without soluble supports, given all those tiny tiny interior walls and cavities.
Actually printed one on a Zortrax printer a few years back - not perfect, but came out pretty good.
There are two different versions depending if you’re in the northern or southern hemisphere. It’s fun to show it to people and show how it changes if you rotate or adjust the pitch/angle of the sunddial.
Is this available on thingiverse or something? I’d very much like to try my hand at printing it on some Prusa’s I have access to. But don’t think I’m up for that big of a parametric modelling challenge.
Love my Prusa MK3s printers, I would love a chance to print this again with better slicing software than Zortrax’s Z-suite (which is horrible, lol).
Absolutely it’s been online since 2015 - https://www.thingiverse.com/thing:1068443
Awesome! I’m definitely giving this a try next weekend. Hopefully the petg I have holds up, I don’t have an enclosure for ABS prints to come out right
I have PETG bog planters sitting out in the sun doing just fine. I print PETG all the time on my prusa printers. Just be sure to dry the filament extensively for best results, especially on something like this where you don’t want a lot of stringing lol
I printed mine out of PLA and it’s been fine. PETG would definitely be better though.
thatsapenis.gif
Their logo is 2
Nope, I printed this with a poorly calibrated FDM printer and it still worked great.
That’s my secret… All of my printers are poorly calibrated
That’s a cool project, it’d be interesting to see a time-lapse video through full daylight hours (with a couple extra frames at the intervals when the numbers are clearest).
Closest I could find is this 6-hour timelapse
20 minute segments, cool!
deleted by creator
Looks like it’s this thing: https://www.thingiverse.com/thing:1068443
deleted by creator
It’s a maddening, yet somehow fun hobby. If you do it just remember it’s better to get a high quality small one vs a shit huge one.
I started with a CR10 knockoff that was a fucking nightmare. Good for learning how they work, but an overall shit user experience. I upgraded to an Artillery Sidewinder X1 and all my headaches went away (for the most part)
If you like tinkering it will be fun.
deleted by creator
The Sidewinder has been reliable so far. If you really don’t want to mess with anything, a comment above recommended Prusa which I agree with they’re just pricier.
I haven’t shopped around in a few years so there may be more notable brands now. Get one with an auto bed leveler, that’s one thing I wish I had. I don’t have the heart to flash in new firmware and deal with the hardware install (bl touch)
The actual CR10 is a fucking nightmare lol, PRUSA is a better way to go but I’ve heard The Sidewinder X1 is pretty decent.
It’s a good mid-range, definitely not up to Prusa standards.
Calling anything from Creality good is a little generous: Their main benefit is cost.
Sorry for lack of clarity, I was referring to the Artillery as mid range.
These work great at different latitudes , you just adjust the angle to latitude +10° (and a different value in winter but same principle)
It moves in 15 minute increments - slowly fades as it changes numbers throughout the day
I did not. I saw it on Mastodon.
How do you reset it after the powers gone out?
You don’t have to cos we’ll all be dead
It looks cool, but I do wonder how accurate it is.
I believe it will depend on the time of year and latitude, but I’m no scientist.
A few ground markings could make it analog as well.
This is about as analog as it comes.
We have restarted up functional print over here at kbin,
kbin.social/m/functionalprint
What’s the night setting like?
