However, I do believe they’re entering a very oversaturated market, with the likes of 8BITDO and GuliKit creating high-quality, affordable controllers in the same niche. ANBERNIC would have to aggressively outprice them to get any kind of attention, but only time will tell.

Not really. 8BitDo really blew it with the Ultimate. They confusingly have two different “versions” of it, and neither have the full range of device compatibility that previous 8BitDo controllers had. The most egregious exclusion from the Ultimate was Xinput over Bluetooth. I still have no idea why they decided to drop that.

Its design takes inspiration from a modern-day Xbox controller and is fully compatible with PC, Steam, Nintendo Switch, Android, and iOS using Bluetooth 5.3 and 2.4g connection. It can also be connected using a USB-C wire too.

If this new controller has Xinput over Bluetooth, all of the compatibility from above, and a strong battery life, it might be a day 1 buy. It will have hall effect sticks, so this sounds like everything I wanted the 8BD Ultimate to be. I hope there aren’t any showstoppers once reviews start coming out.

They’ve been on some kind of emulation crusade then, because it looks like they just killed Ryujinx:

People need to understand what this will mean from a developer perspective before getting all up in arms. This initiative is more kneejerk emotional than it is realistic.

If you’re going to watch only one of these videos, watch the second one:

https://youtu.be/ioqSvLqB46Y

https://youtu.be/x3jMKeg9S-s

I use Backblaze B2, but stored in an encrypted Restic container, set up using this guide:

https://helgeklein.com/blog/restic-encrypted-offsite-backup-with-ransomware-protection-for-your-homeserver/

Restic has been great for automating backups, and even letting me mount the encrypted storage to grab individual files. I like doing it this way since I don’t have to trust Backblaze isn’t reading my data - I know for sure that they can’t.

Performance of storage that is both remote and encrypted is about what you would expect, but I don’t need access to the data unless something bad happens.

Had to quadruple take this wasn’t a Battle Network community, what a crazy thing to see on Lemmy.

We should bring back r/OkBuddyNetwork on Lemmy.

Ok… sure. But what physical devices would I use, and what software would they run?

Are there any “open” solutions to mesh networking that can compare to TP-Link Omada? I don’t think any open source hardware or software can come close, especially not for the newer Wi-Fi standards.

I haven’t bought them yet, but I’m seriously thinking about some Omadas. I imagine I can prevent them from phoning home, and the management software can run locally in a Docker container. Running it like that would be good enough for me even though they’re not “open.”

I’m planning a rework of my home Wi-Fi, and my current plan is an OPNsense box from Protectli, and a few EAP772’s:

https://www.tp-link.com/us/business-networking/omada-wifi-ceiling-mount/eap772/

If there’s something comparable/better that’s more of an open ecosystem, you definitely have my attention while I’m shopping around for different options.

Definitely recommend Motrix:

https://motrix.app/

If the Google download link supports it, it should be fairly resistant to interruptions. If it doesn’t, this might not help much, but you should still use this instead of just a browser.

I haven’t tried to download a Google takeout, so you might need to get clever with how you add the download link to it.

If you just can’t get it to work, you can try getting the browser extension to automatically send all downloads to Motrix. There is some setup required, though:

https://github.com/gautamkrishnar/motrix-webextension

Good luck!

They have to restrict themselves to pickpocketing roaming NPC fascists.

What? Fascists? RuneScape doesn’t have…

Oh. HAM, I almost forgot about those guys.

Before it got enshittified with an update a few years ago, I used the RealVNC Android app to connect to a few of my own VNC servers. Wasn’t interested in any of the fancy features, I just wanted a good VNC app.

Now I use AVNC. It’s solid, performs better than RealVNC used to, and it’s open source! You can get it on FDroid.

It should still work!

I only go back and make changes to LED if something breaks with a major Lemmy update, but Lemmy hasn’t had a major update since January. Lemmy v0.19.4 isn’t released yet, but when it is, I’ll make sure the deployment is up to date.

Note that it does not have any advanced features that a major instance might want, such as storing images on S3, exporting data, or image moderation. If you intend for your instance to grow for 100+ users, this isn’t for you. This is only intended for beginners who are overwhelmed by the other Lemmy hosting options, and want an easy way to host a small single-user or small-user instance.

You also can’t open two spreadsheets that have the same filename. I’m sure that’s led to a helpdesk call or two.

I can’t believe OP is actually forklift certified

This was the point of the protest. Reddit is all over search engine results, especially Google. If people can’t get their answers from a random Reddit search result, the Reddit listings will eventually be deprioritized in favor of other, more reliable sources.

I’m scratching my head to think what Vultr could do better in this case

There was substantial room for improvement in the way they spoke publicly about this issue. See my comment above.

I still don’t like how flippant they’ve been in every public communication. I read the ToS. It’s short for a ToS, everyone should read it. They claim it was taken “out of context,” but there wasn’t much context to take it out of. The ToS didn’t make this distinction they’re claiming, there was no separation of Vultr forum data from cloud service data. It was just a bad, poorly written ToS, plain and simple.

They haven’t taken an ounce of responsibility for that, and have instead placed the blame on “a Reddit post” (when this was being discussed in way more detail on other tech forums, Vultr even chimed in on LowEndTalk).

As for this:

Section 12.1(a) of our ToS, which was added in 2021, ends with “for purposes of providing the Services to you.” This is intended to make it clear that any rights referenced are solely for the purposes of providing the Services to you.

This means nothing. A simple “we are enhancing your user experience by mining your data and giving you a better quality service” would have covered them on this.

We only got an explanation behind the ToS ransom dialog after their CMO whined in a CRN article. That information should have been right in the dialog on the website.

In both places, they’ve actively done vague things to cause confusion, and are offended when people interpret it incorrectly.

There was no judgement, only a settlement. Yuzu is not “illegal.” Nintendo can abuse DMCA and request GitHub take these down, and GitHub will probably listen, but Nintendo would not be “legally in the right” to do so.

I don’t think they were disagreeing with you, I think they were just trying to say:

You shouldn’t need braces to be vertically aligned if your code is uniformly indented. Then you can easily see what code is paired together just by their indentation level.

Of course this is not always true if you’ve got a bunch of crazy nested indentation pushing things off to the right.

You are giving it the -d flag. -d means “detached.” There are logs, you are just preventing yourself from seeing them.

Replace the -d with an -i (for interactive) and try again.

Have you completed the podman rootless setup in order to be able to use it? You may need to edit /etc/subuid and /etc/subgid to get containers to run:

https://github.com/containers/podman/blob/main/docs/tutorials/rootless_tutorial.md#etcsubuid-and-etcsubgid-configuration

More than likely, this might have something to do with podman being unprivileged, and this wanting to bind to port 80 in the container (a privileged port). You may need to specify a --userns flag to podman.

Running in interactive mode will give you the logs you want and will hopefully point you in the right direction.

What’s the logo that looks exactly like Arch but with a stylized X over it? I can’t find any distro with that logo.