What are your bed temps for PLA and ASA? Does it still happen if you preheat the bed? If you rotate the print, does the rough spot follow the rotation?
What are your bed temps for PLA and ASA? Does it still happen if you preheat the bed? If you rotate the print, does the rough spot follow the rotation?
“fill angle” under infill settings.
Yep. I can get ASA down to 12% with an ambient 50%RH using that method.
There are some models out there for wedges with reverse Bowden fittings so you can keep it cracked open all the time.
Try running your dryer with the lid propped open a bit. Most Sunlu dryers don’t have a way to get rid of the humid air pulled out of the filament.
Thanks to Alec I have strong opinions about extension cords and gas lanterns.
Next week: Fedora meets a new friend named Lennart while on her way to Multiuser Mountain. Will they be able to cross the init bridge without being caught by Sammy the Systemd Hating Troll?
V.35 or IEEE-488
Nah, this is Apple. It’s got to be the most expensive: Lemo medical grade.
N connector to SMA, and hardline to USB-C.
But one of those chonky third party ones with the buttons on the sides, and have a FireWire cable coming out of there too for that 2003 feel
[CTRL][ALT][PrtSc]-K-S-U-B
or [ESC] :q!
YMMV
IME is even worse than that. It runs on a supervisor processor in the chipset that has privileged access to the memory, peripherals, and CPU, and can run when the rest of the system is powered off. IME is how Intel AMT can serve as a KVM-over-IP, and just because you don’t have a CPU with Vpro doesn’t mean all the components aren’t there for an exploited or backdoored ME firmware to remotely log your console or inject keystrokes.
This is my favorite shot for shot 2001 remake
You know what, Madred, if you want me to see five lights, like your pretty boy over there, Brian, why don’t you just make them five lights?
I think your bed is warping slightly as it heats up, which is normal. Set your bed temp to 105 for half an hour before starting your print and see if it still happens. If you have a V0 or other manually levelled printer, get the bed to 105 before levelling.