![](/static/66c60d9f/assets/icons/icon-96x96.png)
![](https://lemmy.dbzer0.com/pictrs/image/a18b0c69-23c9-4b2a-b8e0-3aca0172390d.png)
Where do you see low bandwidth? Maybe over long distances but if I can give a pigeon a 1TiB USB stick and send it to the next city I bet it will be faster than uploading the data. If it arrives that is
Where do you see low bandwidth? Maybe over long distances but if I can give a pigeon a 1TiB USB stick and send it to the next city I bet it will be faster than uploading the data. If it arrives that is
Ah, I guess I was only looking at AV1 support in that case. I only remembered it was missing something I wanted due to its age
I believe its missing h265 and av1 hardware support and while it probably has enough performance to handle those codecs in software, I wasn’t willing to drop more than 100 euros on a 5 year old device without hardware decoding for them
Whenever this question comes up I see myanonamouse recommended as a private tracker.
I just wanted to throw in that there is also a tracker called abtorrents which hosts audiobooks and ebooks, though I believe most or all of them are english.
I cannot speak as to the selection between those two unfortunately.
Maybe I missed a paragraph but did you try a new temperature sensor?
That would seem like a logical error source for me when the reported temperature does not match the actual result. Or maybe there is an issue with the thermistor calibration? Is the thermistor type set correctly in your klipper config file?
That’s the fun thing about the Kobo being linux based. Once you get shell access the flood gates are open. I transfer my books over SFTP instead of plugging in USB everytime and then execute the book scan from NickelMenu.
Here is the link to the forum post of the autoshelf mod. It says its for the Aura but I have it working on the Clara 2E and I believe someone reported it also working on the Libra or whatever the 7 inch model was called.
It’s a simple to install but unfortunately a bit fiddly in my opinion. When you plug the reader in via usb, a symbol appears on the device screen that you can tap to run autoshelf upon usb disconnect. Unfortunately it only works on books that have already been added to the device, so you have to plug your reader in twice. Once to transfer the books and a second time to run autoshelf on the added books.
I also use NickelMenu in which I added a button to run autoshelf without having the USB plugged in. My script works by pretending the USB was plugged in, thereby showing me the usb screen and allowing me to tap the autoshelf symbol and then waiting for around 10-15 seconds before “unplugging” the USB again which causes the autoshelf to execute.
Oh yes, the organization is inconvenient if you sideload stuff. The tolino I had automatically grouped books in the same folder into a collection.
I managed to get something similar working with the autoshelf mod on the kobo but it is inconvenient that it is not a default feature. On the upside, I can also use the autoshelf mod to parse series information based on the books filename.
On the topic of modding, I believe kobos use an sd card internally for storage which you can technically change for a much larger one but that requires opening the device, cloning the existing card and expanding the filesystsm. Not to mention that the water resistance will most likely suffer from that process
Thanks, that’s interesting to know. Personally I never had an issue with the 16GB but I mainly read epubs so space isn’t that much of a concern for me. I can see why that would be different on a color model which would also be used for comic books.
If you don’t like kobo, which brand do you prefer? My previous reader was a tolino, which nowadays is almost the same hardware as a kobo but android based instead of linux. Personally I much prefer the kobo over that one.
Goddammit why did you have to show me that kobo now sells a color e-reader? I just bought the Clara 2E last year. Is that one rebranded now to the Clara BW or is that a new model?
Anyway, how is the color display? I looked into color ereaders a year or so ago and the general consensus was that the tech wasn’t really ready
My proxmox server is named Atlas. It hosts a Truenas VM called truenas, a ubuntu server lts vm called Poseidon for docker container hosting a homeassistant VM called homeassistant and a second VM for docker containers called Neptune where I want to gradually move and reorganize my services as required.
I also have a raspberry pi as a general testserver called eileithya and a Synology Nas named Hestia
That looks great. I wasn’t even aware this existed
How regularly do you use both of those devices?
I was eyeing the steam deck for its portability but I rarely would have reason to use it so I held off. Same for the switch.
When I’m at home I play on my desktop. When I’m not at home I’m mostly actively moving about or only waiting small periods of time which are not worth it to start gaming. The only reason I would have to really use them would be during vacations.
Honestly, I wouldn’t try to develop this for network sharing. That would make it encroach a lot on the territory of dedicated server software like jellyfin which most likely has a lot more development power behind it.
Probably better to focus on your niche
I know. That’s what I always do but navigating a desktop site on mobile is horrible :(
But don’t you want to open this website in our app so that we can better track you?
God I hate reddits mobile website, especially when you try to view an nsfw post
I believe teamspeak 4 is more similar to discord than ts3. No idea if it supports screen sharing though
Which ones do you have? I have a seagate ironwolf 4TiB which is literally silent. I had it running 24/7 next to my bess headrest without issues.
Then I bought 2 Toshiba MG series 16TiB drives and I can hear those with my door closed while they are 2 rooms away whenever there are write operations
Wow. Thanks for sharing this site. This is awesome
How would you rate your Voron for regular maintenance and calibration requirements? I got started on an Ender 3 V2 which I have tinkered a lot with. At some point I lost the fun in with the constant tinkering and calibration and simply want a printer that once built is rock solid and relible.
Typically I would say prusa printers fit this requirement but at the same time I really like the amount of options that my klipper installation gives me. Also I kind of want a cube style printer to allow for an enclosure with air filtering which would lock me into the prusa xl as the only choice.
If a Voron is mostly maintenance free it would be a great alternative for my requirements