Not surprising. We’re in a gold rush for AI and Nvidia is selling shovels.
Not surprising. We’re in a gold rush for AI and Nvidia is selling shovels.
I’m using a thinclient (Fujitsu S920), slapped an Intel Pro/1000 NIC in there and installed opnsense. Hardware cost for both used was around €80. Wifi is handled by a TP-Link access point.
It’s a big boy router/firewall, and it’s been quite a learning experience but very fun.
For sure - they did the same thing for the Apple watch. Twice, actually.
https://www.youtube.com/watch?v=XRwkZWowI8o
https://www.youtube.com/watch?v=fOHj5kGU4fY
Or many of the other games in the genre as long as they have auto-aim. Brotato and halls of torment are worth checking out, imo.
Yeah, I’m not so sure either.
I mostly just played around with it because some application I was testing relied on s3 storage and Minio was the best selfhosted project I could find that was s3 compatible. Worked pretty well, from what I can remember.
I can’t help with the whole connection between the VPS and your home server bit, but Minio is probably what you’re looking for when it comes to selfhosted object storage.
I’m not sure if it’s every ADHD person, but I have accidentally quit smoking.
If you can accidentally quit a physically addictive habit, things like brushing your teeth don’t stand a chance.
I was going to mention it-tools. It’s great!
And if you need more stuff in a similar vein, cyberchef is also pretty neat.
That’s so strange, I have no problems printing PETG all the time.
Yeah, I don’t know - I’ve never had any big issues in the past with it either (I mostly print PLA+ though, unless I need something more heat-resistant for my car or outdoor use).
This particular issue was with an Ender 3 V2 running a BLTouch and an aftermarket textured PEI sheet in an enclosure - so there were no drafts or anything that would explain the bad adhesion either. Just scrubbed it with some water and dish soap. That was literally the only thing I messed with between the spaghetti result run and a great first layer run, so I figured I’d mention it in case it might help OP.
I’m exclusively using textured PEI surfaces on my printers, and I can strongly recommend them as well. That’s why it was so surprising to see PETG refusing to stick, even though my first layer with PLA was having no issues at all.
I mostly print PLA, and I was just done doing maintenance on the frame and doing some calibration, etc. Everything was dialed in - the only thing I didn’t bother with was the bed because I had no issues with PLA.
Literally, the only change between PETG spaghetti and a great first layer was cleaning the bed.
I was pulling my hair out over poor bed adhesion with PETG while I was having no issues with PLA. As in, completely failing a first layer test with PETG turning into spaghetti while PLA printed perfectly.
Turns out that PETG seems to be more sensitive when it comes to how clean the bed is. Scrubbed the bed with water and dish soap and the same gcode that was producing spaghetti was now printing without any issues.
I’ve been very happy with mxroute for quite a few years now. They have a summer deal going on for $40 a year for unlimited domains and accounts, you’re only limited by storage (100GB) and outgoing emails per hour.
t would be helpful to know what you consider basic features you want the host to support, but catchall works.
There’s also https://github.com/jez500/bender which is heavily inspired by homer, but with a web gui to customize the links rather than having to edit the config.yml
You can use your own (sub)domains for Cloudflare tunnels if you use Cloudflare as your nameserver.
Eternal September is early this year.
Unless I’m actively looking for a specific type of application, or to replace one I already run, I just check in on the subreddit periodically, just looking at the top posts from the past month or so.
I guess I’ll start checking in on lemmy now.
There was a time, where I was checking for new stuff to selfhost almost daily. But at this point, I have what I want, and there is no point in trying to change a running system.
The biggest reason is that PWA allows for web push notifications.
iOS is pretty strict when it comes to background apps keeping open connections, that’s one of the reasons why there is no gotify app on iOS. They list the possible workaround with apple’s APN service, but that would kind of defeat the purpose of selfhosting,
I’m afraid the biggest obstacle would be Apple’s strict restrictions on background services. We cannot keep a persistent WebSocket connection in the background without abusing some APIs, which will absolutely disqualify the app from going onto the App Store and drain the battery significantly. Notifications could only be delivered through APN, which requires a developer account and a central server to manage notifications and send them to Apple before reaching the user, but this is not what gotify is designed for.
https://github.com/gotify/server/issues/87#issuecomment-457453135
//edit: If you check the ntfy docs, you’ll see that instant delivery is not supported on iOS. So if you have uses that are time-sensitive, PWA with web push definitely has the advantage.
I think it’s more just because we’re early adopters and the first wave of refugees.
Yes, and because there are some little hurdles in the signup process. Having to select an instance isn’t really that big of a deal, but it will actually stop quite a few people.
The people who do make it through care or are invested enough to join and are less likely to shit the place up. It’s a self-selection process.
Funny you checked protondb for the previous ones, but not BG3 itself. It’s out in early access, people have been playing the early acts for a while now.
It’s rated gold. https://www.protondb.com/app/1086940/
That was always the point of the blue check under Elon. It’s very clear already that blue checks have vastly higher reach and engagement. This all started back in December.
https://www.theverge.com/2022/12/23/23523845/twitter-blue-paying-priority-replies-conversations