Yeah, tandem oleds are pretty rad. And worst case you just hook the mbp to an external display. I shall acquiesce to oled.

I really don’t think it needs oled or thinner. Oled risks burn in (I say as I have an oled desktop monitor without burn in, but I worry about it) — though perhaps Apple can figure that out (micro led would be great though). As for thinner, it’s pretty dang thin already. I’d rather more battery in the 14” and be a little thicker, honestly.

N-95 masks are protective, and to a certain (most likely lesser degree), KN-95 masks are also protective.

Bookmarked and will come back to this. One thing that may be if interest to add is for AMD cards with 20gb of ram. I’d suppose that it would be Qwen 2.5 34B with maybe less strict quant or something.

Also, it may be interesting to look at the AllenAI molmo related models. I’m kind of planning to do this myself but haven’t had time as yet.

This seems cool. I like to run my steam set up in a flatpak (in part because I don’t really like 32 bit binaries cluttering up my main paths) so I’ll wait h til they release it there. Or perhaps I’ll get involved and see if I can’t package this up myself.

Arch Linux has a very strong reputation as the best Linux

I use arch btw (well, cachyos). I don’t really ever text anyone or even talk about it online though

Edit: CachyOS edition:

CachyOS Linux has been working with a variety and a lot more features to improve performance

How big is this controller? I have wide palms but shortish fingers. From palm to tip of middle fingers like 7.5”, which is low side of male hands, but 4” wide palm which is above average. Makes finding ergonomic controllers difficult. I can reach the middle of controllers without too much difficulty, but reaching lengthwise (eg the shoulder buttons) can be problematic (perhaps why I like the ps4 controller — it’s wide but squat; it just lacks usability with no back buttons, and it only pairs to a single device at a time). I guess a smaller Xbox style controller would work okay for me — is Wolverine worth a try you think?

I’m personally looking for a Hall effect joystick, ps5 style layout, wireless capable, plays nice with Linux game controller. Seems like I’ve seen flydigi as a potential option, and maybe some 8bitdo ones. Maybe scuf?

One major issue I’ve had is my ps4 controller doesn’t have multipoint, meaning it will only Bluetooth pair to a single device at a time. Wanna use it on your phone? Gotta pair it. Wanna use it again on your pc — yep, gotta pair it again. Reaaaaallly annoying.

Eh, I’d personally just get a more ergonomic vertical mouse, wired if you need the absolute lowest latency. Much easier to come by and they’re cheap. I used an evoluent I think it was wireless mouse for DotA2 when I played it ranked years ago, and I found it more than capable to climb the ranks with it. I also have a Logitech gaming mouse, for comparison.

Some vertical mice can easily be found on Amazon or anywhere really. Logitech makes one (it’s okay) and a few others as well.

Conversely, if just looking for more ergonomics, you could try a hyperlight mouse with a good gliding wrist wrest.

Fish don’t really swim, they are flying through the water.

Thanks for that summary! Definitely an incredible achievement. 66ft could fit inside a lab, instead of inside a huge property. Hopefully democratizes particle accelerator research a tiny bit.

https://www.nature.com/articles/s41557-023-01346-3

Nature article.

It should be punishable by fine for science journalists to write about a science paper without citing the paper — I couldn’t find it linked anywhere in the article but do have some content blockers so perhaps it was just hidden by those. At any rate, interesting findings.

Ah thank you, I should’ve read more closely :)

Sure, but closed source audits aren’t often made public. So we don’t know when, or how, closed source software is audited. Beyond just our ability to self audit open source, we often get better reporting on the contracted audits performed on open source software.

This is really awesome — open source allows for auditing. Not great that there are vulnerabilities, but these vulnerabilities also exist (and possibly more) in closed source software that doesn’t get audited to be fixed, just exploited. Hopefully these get patched soon!

For what it’s worth when I purchased an extruder upgrade I had to get a new motor. The motor on my Ender 3 pro had a press fit gear on the motor arm and it was too short to fit the dual gear extruder (I did manage to get the press fit off only to realize the arm was too short).

If you’re able to order from Amazon, or a similar store with a decent return or exchange policy, I’d just get what you think you will need and return or exchange as necessary.

It seems to be coming predominantly from the hot end / extruder assembly. I have seen that various folks have resonance issues on this printer, so I’ll see if I can track down any more of those fixes. I did try the side panels off, loosen one of the screws, move the head around, retighten the screw thing, but that doesn’t seem to have made any difference. So I guess the gantry is square but something is causing resonance in the print head.

I can’t believe it would be the extruder, but I am a little curious about it since it also seems to have some odd extrusion effects (essentially like what I’d imagine it would look like when you “skip” over a surface by dragging something along; little splots, then thin, then little splots, but almost imperceptible due to the very high frequency of the micro stutters — first layers look almost flawless too so not really sure what the deal is).

Oh that’s interesting. I wonder if it’s a resonance thing / something a little loose. Maybe I’ll try retensioning the belts and see if that helps. If anything works I’ll mention it, just in case it’s related to your buzzing too!

Also, I am planning on purchasing some more hyper PLA to see if I can observe the same buzzing with that filament. I can’t imagine the filament type would cause the buzzing, but strange things do happen. Will report back here with any findings on that, but if anyone else has any thoughts in the meantime on this buzzing, I’m very keen to hear them!

Ah this sounds interesting. If I ever get around to taking the bottom plate off, I’m definitely going to check that out. The only other idea I had was to get metal shim washers and put them below the stand-off mounts for the bed, but I was worried it would befuddle the strain gauges somehow.