I ❤️ fishnets. The texture is so satisfying.
I ❤️ fishnets. The texture is so satisfying.
Who fucking watches Apple demo videos?
What about vaping marijuana?
Prime primarly has nothing to do with software. It’s a delivery service.
If you think people aren’t printing firearms with an Ender 3, you are a fool.
Are the animals humans? And is the abuse the act of eating that sad sandwich? If so, I agree, that is animal abuse.
I hope everyone here is having a wonderful day!
I vote for one of those other parties!
Just fucking return it. If I made a post for everytime Amazon did something like this to me, it would get really annoying really quick.
For what it’s worth, I’m not the one downvoting you. I appreciate your perspective. However, if nobody can retire without the ability to pay $200k/year, very few people will ever be retiring. I believe working with patients in these terrible situations, has created a form of selection bias were you don’t see the successful retirements. Not everyone needs a Fat FIRE, and I would prefer to live frugally and retire early vs working away my life until a regular retirement age.
To add to this, you are also expected to withdraw more year after year along with inflation. If your safe withdrawal rate allows you to withdraw $40,000 on year one, you can withdraw $40,800 the second year (assuming 2% inflation). Dispite this increase, your portfolio should still grow. If you are withdrawing all of your gains, you are setting yourself up for failure.
No, you always take less than the increase. This is why most FIRE plans revolve around living on 3-4%. The gain percentage minus withdrawal percentage should ideally leave you with a number greater than the losses due to inflation.
That’s a long way of saying your “best-case scenario” is actually a worst-case scenario.
You’re ignoring that your balance will increase over time through interest and stock gains. I believe this is historically around 8%, exceeding inflation.
I think there is a very important distinction between accuracy and tolerance in engineering. +/- .010" is not a dimension, but a tolerance that can be applied to a dimension. However if your example was changed to a .010" dimension, I would agree with you as I stated in my last comment. There is no need to give any further accuracy to that dimension if you are just adding zeros to the end (unless you are using block tolerances that rely on a specific number of digits to correspond with a standard tolerance). Unfortunately, not everything is designed using the same units and you will inevitably end up with a part designed in mm that uses a bolt-on component using a hole span in inches (for example, a nice round 1-in span). If you want a +/-1 mm tolerance on that part, you wouldn’t want to round every dimension to the nearest mm because you may end up with a tolerance of 24-26 mm when you really wanted 24.4 to 26.4 mm. I like to provide true dimensional accuracy (to microns or .0001" if I’m not just adding zeros) and then apply a suitable tolerance independently, using GD&T.
Regarding paperless manufacturing, I agree that many components are made straight from the models these days and imported directly into a CNC machine. However, there should always be a drawing or a digital equivalent a drawing. This is the contract that specifies acceptable tolerances to the manufacturer, and it will be used during QA inspection to determine if an acceptable part has been delivered.
I use GD&T on all my drawings, including 100% of my hole callouts. However I’m one of the more enthusiastic adopters of ASME Y14.5 at the place I work. Therefore, I get what your saying regarding the tolerance range, but since most of my coworkers are still relying on block tolerances, I’ll refer to a .010" positional tolerance as a “+/- .005” equivalent" in conversation so there is no miscommunication. I can see how this is not the norm.
Eh, if someone tells me to reduce a tolerance from 5 to 10 thou at work, it’s understood that it’s +/-5 and 10. I don’t think I’ve ever heard someone use the full range of a tolerance in conversation. If the tolerance isn’t bilateral, it would be said like plus 5, minus zero. Anyways, +/- .0005" is our standard tolerance on the span of all dowel hole pairs.
I don’t see anywhere in the article where Musk says “tolerance”. He specifically says “accuracy” and goes on the talk about listing more decimal places instead of rounding. Any mention of tolerance is done by the author of the article. If certain dimensions are not naturally rounded to one, or even two decimals, there is no reason not to list it to three or more on modern drawings. GD&T can specify whatever tolerance is necessary without relying on a decimal-based block tolerance. I’d be interested in seeing the original email but it seems like there is a misunderstanding by the author given the context being discussed.
I default to three decimal places for all my basic dimensions on both in and mm drawings. One of the benefits of GD&T is that you can give provide additional dimensional accuracy, completely independent of the tolerance being specified.
Do you mean the system where people would have the opportunity to cook better food for themselves instead of ordering fast food and paying exorbitant fees to have it delivered?
Lol, it’s a clip from Caddy Shack and clearly a joke pal.