- cross-posted to:
- [email protected]
- cross-posted to:
- [email protected]
Basically title, the top mount broke so I screwed the mount to a bench. Only seems to be happening with this filament though as I’ve been running this setup for at least 6 months.
You must log in or register to comment.
I think that filament is very wet and needs to be dried immediately.
Some filaments absorb moisture and are more susceptible than moisture problems than others, sometimes it’s worse from color to color and brand to brand.
Store filament in a dry box to prevent this, and use a food dehydrator to fix this
Don’t put your filament in the oven you will ruin both the roll and your oven!
I think this can be caused by a filament that requires dehumidification .
Yup, looks like filament that took on moisture. Stick it in a bag with some silic get packs or a food dehydrator
oven with the door slightly open works too
*on warm, don’t melt the filament lol
yeah don’t accidentally a filament donut
You won’t believe this 3D printing hack: How to print a 2kg donut in 20 minutes with solid infill!!!
