🐍🩶🐢

Wait, is that actually Garbage? That was the first thing that popped into my head when I saw the picture. That Bond music video she did was awesome. World is Not Enough.

Sorry, didn’t make it home until today and not sure if you get notifications on edits. You will need a monitor and keyboard hooked up to your server as you will not have ssh access until the network config is “fixed”. I would do the below with the GPU removed, so you know 100% that your networking config is correct before mucking about further.

Step 1 - Create 99-default.link file

Add a /etc/systemd/network/99-default.link with the below contents.

# SPDX-License-Identifier: MIT-0
 #
 # This config file is installed as part of systemd.
 # It may be freely copied and edited (following the MIT No Attribution license).
 #
 # To make local modifications, one of the following methods may be used:
 # 1. add a drop-in file that extends this file by creating the
 #    /etc/systemd/network/99-default.link.d/ directory and creating a
 #    new .conf file there.
 # 2. copy this file into /etc/systemd/network or one of the other paths checked
 #    by systemd-udevd and edit it there.
 # This file should not be edited in place, because it'll be overwritten on upgrades.

 [Match]
 OriginalName=*

 [Link]
 NamePolicy=mac
 MACAddressPolicy=persistent

Step 2 - Reboot and find new name of NIC that will be based on MAC

I forget if you have to reboot, but I am going to assume so. At this point, you can get the new name of your nic card and fix your network config.

1. ip link should list all of your nic devices, both real and virtual. Here is how mine looks like for reference, with the MAC obfuscated:

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enxAABBCCDDEEFF: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master vmbr0 state UP mode DEFAULT group default qlen 1000
    link/ether AA:BB:CC:DD:EE:FF brd ff:ff:ff:ff:ff:ff
3: vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
    link/ether AA:BB:CC:DD:EE:FF brd ff:ff:ff:ff:ff:ff

Step 3 - Fix your network config and restart network manager

You will need to edit your /etc/network/interfaces file so the correct card is used.

1. Make a copy of /etc/network/interfaces, just in case you mess something up.
2. sudo vim /etc/network/interfaces (or whatever text editor makes you happy) It will need to look something like below. I have to have DHCP turned on for mine, so your config likely uses static. Really all you need to do is change wherever it says enp yada yada to the enxAABBCCDDEEFF you identified above.

 source /etc/network/interfaces.d/*

 auto lo
 iface lo inet loopback

 iface enxAABBCCDDEEFF inet manual

 auto vmbr0
 iface vmbr0 inet dhcp
 #iface vmbr0 inet static
 #address 192.168.5.100/20
 #gateway 192.168.0.1
     bridge-ports enxAABBCCDDEEFF
     bridge-stp off
     bridge-fd 0

3. Restart your networking service. You shouldn’t need to reboot. sudo systemctl restart networking.service

Step 4 - Profit?

Hopefully at this point you have nework access again. Check the below, do some ping tests, and if it doesn’t work, double check that you edited the interfaces file correctly.

1. sudo systemctl status networking.service will show you if anything went wrong and hopefully show that everything is working correctly
2. ip -br addr show should show that the interface is up now.

lo               UNKNOWN        127.0.0.1/8 ::1/128
enxAABBCCDDEEFF  UP
vmbr0            UP             192.168.5.100/20 

At this point, if all is well, I would reboot anyways, just to make sure. If you add any GPUs, sata drives, other PCI device, disable/enable wifi/bt in the BIOS, or anything else that changes the PCI numbering, you don’t have to worry about your NIC changing.

I am not at home, but what I did was change the 99-default.link file. I found this from the two pages below. https://wiki.debian.org/NetworkInterfaceNames#CUSTOM_SCHEMES_USING_.LINK_FILES https://wiki.debian.org/NetworkInterfaceNames

Basically, by doing this, your nic cards will be forcibly named using the mac address:

#/etc/systemd/network/99-default.link
 [Match]
 OriginalName=*

 [Link]
 NamePolicy=mac
 MACAddressPolicy=persistent

Afterwards, you will need to reboot and then update your network config file to use the correct names. I don’t ever change the network config with the GUI in proxmox as it has wrecked it too many times. I will update this reply again later with some more information on what to do.

🤣 no need. I certainly am not Linus levels of stickler on it and don’t sit there and worry about it. I just found the concepts he is trying to teach very helpful. Fail fast and breaking things up into smaller methods that do “a thing”.

See, when I was in school, they didn’t teach fail fast and if anything they told you not to. Nowadays, we have moved past that nonsense. I gave it a shot about a year ago, and it has made me a better programmer. I am not going to sit there and count braces, but things are a lot easier when you get the error cases over with and out of the way.

There are always going to be exceptions, but I have personally found a lot of value in using ‘fail fast’, and making more smaller methods that say what they do. I am not always great at that second part, but it is a process. As someone with severe ADHD, it has made it a lot easier to work through problems. Sure, you can end up with more lines of code, but who cares. Compiler should be optimizing most of that shit out anyway.

https://m.youtube.com/watch?v=CFRhGnuXG-4

Watch this. I have found that this makes it way easier to debug shit, is more readable, and cuts down on mistakes.

I changed my settings to name nic cards by mac address instead of the enumeration as I got sick of the name changing when I would add/remove pci devices.

It looks like with multiple power cubes you can break it up. My favorite thing about the switch is the separate joy cons. This is far far far less painful for me to hold than traditional controllers. If this worked on Linux, Mac, PlayStation, and my Steamdeck, I might try it, as long as I could return it if it doesn’t work out.

I struggle with buttons in general. My palms are too small so I can’t wrap my hand around them very well. I have to death grip with my palm or I drop it, but I am constantly shifting around as my fingers can’t reach certain things easily either. The off-axis joysticks on an Xbox controller is a no go as I have to hold the controller rotated a bit which means that up isn’t up. I do much better with PS5 controllers, but still get a lot of pain in my hands if I play too much.

https://www.byowave.com/faq

No worries! I am on mobile, so I get tired of typing things sometimes. Thank you for going into more detail as all my eloquent points are spent for the day. I sent my favorite Shake Hands With Danger safety video to the software guys yesterday. I hope at least one of them watches it.

Couple things. Fall prevention training. Part of that is knowing how to rescue yourself if you do fall, what to do if your only option is to wait for help, and how to help someone else. There are training sites that will push you off a wall…

Fall arrest systems are meant to save your life when you fall. You don’t hang in the air with them all day. That is a different type of harness. If you fall, you can’t just get up and continue like nothing happened. Fall arrest part of the harness has to be replaced. The rest of the harness has to be fully inspected, if not replaced as well.

Hanging in a harness can kill you as the straps will cut off the circulation in your legs. To prevent that, there are these little pouches on a line that you can deploy from your harness that are basically stirrups. You can put your feet in them and “stand” up while waiting for rescue. If someone is in a harness and unable to rescue themselves, this becomes problematic. Gravity is a bitch and waits for nobody.

I figure it is just a display, but I guess they could go through the effort of shoving people off. Probably safer than the plane. Especially when you are responsible for inspecting your own safety equipment every single time you use it.

I never considered old DOS games until now. Thank you!

I think I vaguely remember something about that, but I would be pretty upset if the keyboard navigation was unusable. It is almost as bad as the stupid mouse enabled BIOSs that never work. It doesn’t even work on the Dell laptop I have for work. The keyboard navigation is always extra special in those cases and involves a lot of button mashing to get to the correct thing, if I can figure it out at all.

I don’t use wired mice either and had to dig the old gaming mouse out recently so I could get to some menus on a new machine to pair the mouse. I have done the mouse pairing thing through console and it isn’t the best experience, especially if you are trying to figure out if things are working in the first place. For me, I could figure it out. For a new user, you are asking a lot.

Just give me an old school OS installer with simple menus, easy keyboard navigation, and the bare minimum guidance needed to not entirely fuck it up.

I love purple, but I constantly click on Discord instead of Teams throughout the day. Too many icons with the same or similar color scheme.

I am so glad my new job had sense to say no. Their cost benefit analysis pretty much said the amount of pain, man hours, and bullshit it would cost to run far outweighed the higher price of the alternative product they went with.

The best was on arch because I had no idea how to use pacman, which I needed to install man, when I needed how to use pacman. I will have to take a look at tldr. I mostly use Debian without a desktop environment, but have an Arch VM for gaming here and there. Works out.

I get confused every time I install a distro and man isn’t installed by default. I guess I get the bare minimum philosophy, but it throws me off every time. First thing I install is vim, man, git, and probably a couple other things I can’t remember right now.

I do like a decent man page that has examples for us dummies and I have found that they have improved a lot over the years.

I am so jealous. Those assholes will not run it to my apartment. Landlord tried. The entire neighborhood behind and next to us has it. I am just done and fed up with Spectrum. Maybe I should call and bitch.

Day 1 was some awesome crazy dude on IRC teaching me how to compile the kernel from source, what options to choose, and then installing Slackware.

Thank you! I will give that a shot tomorrow and test it

I will take a look at it, but the fundamental issue is it screws with the iommu groups too and then I have to go fix that in proxmox. If I can at least guarantee a network connection then I can remote in and fix it in the event something goes really wrong.