This being self hostable makes me instantly like this. Something like G photos that I could self host and dump a lot of shit off my phone storage would be amazing.

Yo pass the joint maaaan

Ok, so a vast majority of 3d printers do not connect directly to a PC these days. They have a self contained microcontroller.

The workflow is:

1. You design or download a 3D model you want to to print.
2. Open the 3D model in a slicer software. The slicer takes a 3D model and, using a profile designed for a specific printer’s nozzle size and controller, converts the solid volume of the model into G-Code, or machine readable code that is a series of coordinates and move rates. This tells the printer where and how to put plastic.
3. Export the G-code to a .gcode (or other) file. Save that file onto an SD card.
4. Put the SD card in your printer.
5. Select the file on the printer display and away you go.

Now, some printers use a network connection component, eg Bambu printers have a wifi adapter. This let’s them download firmware updates and receive print jobs from a computer remotely without needing to move SD cards. This does require the right software, e.g Bambu printers require proprietary Bambu Studio (or it’s open source fork OrcaSlicer) that has the networking module to talk to it. This doesn’t require special driver setup though.

me too thanks

It’s not even a mode

You are the goblin

Pads tend to be a lot more sensitive to uneven pressure ime, but I’m also old school and don’t use pads over a decent paste.

If I jack off to this is it considered mathurbating?

Normal

Zen3 is OK to 95c TJmax, the cache would probably like to be cooler than 95 so you’re fine at 85

5700x3d is not a high wattage part tho if you have a big tower cooler it should easily be under 70c l, check mounting pressure, thermal paste (do not use a pad)

obligatory wholesome klingonposting

well, no… i’m not exactly complaining about either tho

damn i need to learn this magic

I am seeing above. I’ve been looking above for a while…

Tasha does not have that much ass. No way.

Yeah I’ve been thru a couple periods of avoiding caffeine and you can definitely tell when it wears off. About 5 days seems to reset most of my tolerance.

heart exploding levels of caffeine, just keep adding more it works eventually

(do not do this I had to survive college somehow and was desperate)

I suppose that would work too, just solvent and then smear the outer walls of the boat. PLA is not exactly water safe though and will break down/become mechanically weak with long enough exposure. So it would be better to ideally seal the plastic entirely with a laquer

watertight boat and a free high? seems like a win win

Fiberglass may be overkill, but you would absolutely need some kind of sealing lacquer around the entire print or it will definitely fill with water.

Holy shit, a Fringe meme? In 2024?!
I thought people had wiped that show from their collective memory by now, even as amazing as it was I never find anyone who knows what it is…

It was the style at the time, after all.