Ya, I know I need to jump the ground when wiring to power cable for the dryer. I was going to do 10/3 since I had the money for it, but lowes and Home Depot were both sold out when I went to pick it up. Whirlpool told me 10/2 would work so I just went with that in the effort of saving time. New dryer is delivered Tuesday so I want the wiring done before then. The 30a double pole breaker was easy though. Probably the least questionable part of this process

Yup, I already have the electrical tape to mark it. Though I was told I could mark it red or black and both are universal markings for hot wire. Is that wrong? It doesn’t matter here because I have red tape but for future reference it would be good to know

I just finished running the new wire. I really lucked out. My step dad has a 50’ fishing tape and a 10’ endoscope that I was able to borrow. I got a new 10/2 wire pushed through fine. I called whirlpool for the specifications and they said the dryer needs 30 amps and will work with 10/2 or 10/3 wire. I was gonna go for the 10/3 but both lowes and Home Depot were sold out so I went with the 10/2. Got a 25’ roll and it used most of it. Maybe a foot of slack

The insulation protects the stuff outside the wire from catching fire. The wires get hot while carrying a load. Neutrals always carry a load once the hot is powered on. Grounds only carry when something goes wrong such as a power surge. They carry excess electricity the neutral can’t handle and usually significantly less so they don’t get as hot. There’s no reason not to insulate a ground, and it arguably is safer, but the amount safer is noticeably less considering the extra cost. For a ground to get hot enough to catch something on fire several other safety measures would need to fail. In that regard it’s not necessary.

Always! I’ve been doing a lot of work but I still don’t mess with safety. Obviously the main will be shut off and I won’t be doing the work while home alone in case something does happen. But since it is 1 breaker, 1 wire, and 1 outlet all being replaced it does seem to be a pretty straight forward replacement

They are right. I was wrong. But the wire is getting replaced regardless. My step dad does a good bit of electrical work and said he doesn’t trust an aluminum ground on a 240v outlet

So, I have a problem with electricians. I’m running out of them lol. I’ve had 4 out already for other projects and I get quotes and in 2 cases even paid the first payment but no one actually shows up to do the work. So I have just been doing it myself.

That’s said, my step dad does a lot of electrical work so I do have a bit of help even if he’s not a full on electrician. He’s has tons of tools for this type of work and makes most identification pretty easy. He took a Quick Look at the picture and he said it needs replaced based on the fact that it has an aluminum ground so I am just going to run all new wire. At least I know now that it will be the right wire

Snaking wire without a guide for that distance is extremely tough. The normal way to swap out wire would be to tie the new wire to the end of the old and the pull the other end of the old. Since you can’t pull the old (it’s stapled and secured) you can’t pull the new through behind it.

To your edit, it should be 2 hots and a neutral is my understanding. Hots deliver electric and neutrals complete the circuit back to the back. In newer wiring the 4th is the ground but a 240v 3 wire has no ground. However, if it is a neutral it should be sheathed and individually insulated.

That being said, I’m not an electrician and most of this is just what I’ve learned from replacing outlets and rerunning 120v wire in this house. If an electrician wants to tell me I’m wrong I’m all ears

It does look bad and I plan to replace it regardless. I’m more so wondering if it needs replaced now. Wire is expensive and replacing this will be pretty extensive as I would need to tear out horse hair plaster to unstaple it from the studs. I’m not 100% on if it’s stapled or not but it’s tough to move and the other wires I replaced were stapled down so we had to tear open the plaster and run them that way. This would be going from 2nd story to basement through kitchen behind the sink so it’s not a quick job. If it needs replaced now I’m gonna need to cancel the whole weekend

I have no pity for this man and he should die. However, I don’t believe the government should have the power to execute its citizens. This case may be as black and white as they come, but this gives the government the ability to make the argument in some fairly gray cases. He shouldn’t be sentenced to death. Life in prison with no chance of ever being released, sure. But never should the government be allowed to kill its own people for any reason.

Sooo what, another 20k for California and everyone else splits the rest? Sorry, but it’s so difficult to get excited for this when I see these plans push more to California, but on the east coast I have a single fast charger within 30 miles (proof. No filters on PlugShare except limiting it to CCS. Since I don’t own a Tesla NACS is hidden. https://imgur.com/a/TUbTMh0)

They’ll cram them in every corner of every city, but the people who are worried about range are the ones outside of the city, not on major highways or anything. Btw, one of those doesn’t count since it’s a dealership and is for Nissan owners only.

Edit: Not sure why this keeps posting to your comment specifically. I’m replying to the main post, but it’s only posting as a reply to you. Weird

Sooo what, another 20k for California and everyone else splits the rest? Sorry, but it’s so difficult to get excited for this when I see these plans push more to California, but on the east coast I have a single fast charger within 30 miles (proof. No filters on PlugShare except limiting it to CCS. Since I don’t own a Tesla NACS is hidden. https://imgur.com/a/TUbTMh0)

They’ll cram them in every corner of every city, but the people who are worried about range are the ones outside of the city, not on major highways or anything. Btw, one of those doesn’t count since it’s a dealership and is for Nissan owners only.

My wife and I may be part of this. They denied her 2 week hospital stay for preeclampsia and subsequent delivery as “unnecessary” and we foot the bill for the $17k stay

Definitely gonna save this for later. Having the formulas laid out like that is nice. Plus, what you said lines up pretty well with the wikihow linked above. While that isn’t the best source for confirmation, it makes me comfortable knowing that multiple sources came to the same methodology.

Thank you! I will watch this during my downtime at work today