My girlfriend has been watching her friends dog while they are out of town and she sent me this recently. I can’t exactly remember the pups name right offhand which is sad because I went to his birthday party… they had cake, a portrait on the wall and they actually made stickers of the dog for everyone.
Final Fantasy VII Remake Intergrade would be rad, the og was the first rpg I played and finished.
Thanks for putting this on!
You make good points here for the beginner however there are better alternatives and solutions for basically everything you mentioned here. The biggest I want to address is conflicts on your system. Generally running servers on metal is just outright bad practice. Containerize. Always containerize. There are lots of great options. Docker, podman, Lxc, helm, flatpak… hell. Snap if you must. Running servers on metal is generally is just asking for trouble unless the system’s entire purpose is for that. Also the cg-nat situation. Personally been behind it for a few years but it’s not a problem as long as you have a reverse proxy tunnel in place. Not a hard fix at all.
If you like 1.1.1.1 the. You should try 9.9.9.9. Or better yet host unbound pihole if you’re up to the challenge. Best dns experience I’ve had.
Nothing, I was just stating that the only real option for an easy Nvidia Wayland experience right now is kde. If anything it’s a complement.
Valve thought it was appropriate when they made the steam deck.
They are running Nvidia. Their only option for Wayland is kde.
Luke was also advocating for Linux. He said that it was much better in terms of productivity.
The nvidia/vulkan open source driver is apparently pretty rad. I haven’t had a chance to test it myself yet since I am running a dual gpu setup that contains one gpu that isn’t supported. The original maintainer for nouveau is apparently also working at Nvidia and contributing to the project as an Nvidia employee now too soooo maybe they are turning over a new leaf?
He goes into detail in the video below. https://odysee.com/@BrodieRobertson:5/did-nvidia-just-officially-support:2
Tons of good responses here. I’m surprised that nobody has brought up Tailscale though. It’s def the easiest vpn solution I have found. It’s got some great documentation and how to projects to get a home lab running and it’s got its own domain system baked in most of it being zero configuration. You can access mullvad vpn exit nodes straight from it, and set up those domains with ssl super easy e.g.
sudo tailscale serve —https=443 localhost:8096
That single command would allow any other devices connected to your Tailscale account to reach your Jellyfin using the domain “{serverhostname}.[tail-scale].ts.net” complete with a private reverse proxy and ssl cert.
There are a few things to click around in tailscale on but it’s a extremely easy to use free application that has made my self hosted life significantly easier due to my system living behind multiple firewalls that I sadly have no control over.
I can only add 2 things that I know of here that could help.
#1.Try a linear advance tune. That alone should give you sharper corners and more consistent details at higher print speeds.
https://marlinfw.org/docs/features/lin_advance.html
#2.A direct extruder can help with getting very precise sharp corners but from what I understand it will hurt with accuracy on curves. Also there is the whole fact that there is a motor on top of the hot end so weight and whatnot will hurt speed.
Anyway just check out #1. It should help with your issue. If not that then a feed rate tune would solve any over extrusion problems.
Would have been nice if they actually shipped devices to people who paid.
If there is a way then I guarantee it will eventually come to everywhere else. One way or another.
No no no no. I love the pinebook pro. But please don’t suggest it to anyone as a newbie hardware choice trying to get anything done. There are so many little quirks on hardware this slow and moreso having to deal with arm repos and all of the incompatible software/workarounds.
A few examples.
If you want to watch YouTube you basically have one browser option. Chromium. Additionally if you want to watch any drm content then you need to install a docker container that runs chromium that has drm enabled.
App images and flatpak software repos are nowhere near complete which can be not great for someone who is just trying to get some work done. Really not great when some devs are exclusively distributing via flatpak.
No virtualization. It just doesn’t have the capability. Sure there are docker containers but that isn’t exactly virtualization.
I love my pinebook. It’s a great machine for just have a very cheap low spec thin client with a decent keyboard and screen but I would never ever recommend it to a newbie.
I get around it by using an alternative search engine such as searxng.
According to ordinary things it takes hours.
Check the screw that is imbedded in the brass gear. It holds it in place to the stepper motor it is attached to. If it is loose at all then it will produce similar results to a clog. Also be sure that the screw is aligned to the cutout on the stepper motor axel. That is what keeps it spinning. If it is tightened but not aligned then it will make that skipping sound.
Yeah, last time I checked it suggested you just use a live install if you wanted to use it lol. I don’t think it even works in macos despite macos having Macports, quartzx11 and jackctl support.
Guitarix was one of those for me. I know there are better virtual amps on windows but I quite enjoyed guitarix for its open and free nature. Plus audio routing on windows is a nightmare.
I have thought the same in my adventures into alternative operating systems.
Blacklisting is definitely a thing. It also depends on the device and the firmware it runs. There can be a lock on the firmware that can be triggered depending on the carrier (and the firmware of the device). I have heard of a bug in the past where a carrier that had no right was locking iPhones that were unlocked on a byod but that was like in 2013. It was also a bug.