I have a 10Gbps internet connection. On a system with a 10Gbps Ethernet card, I can get ~8Gbps down and ~6Gbps up:

I'd expect this to easily max out a 2.5Gbps network connection. However, while the upload is maxed (or close to it), I can only ever get ~1.0 to 1.5Gbps down:

Both tests were performed on the same system. The only difference is that the first one uses a TRENDnet 10Gbps PCIe network card (which uses an Aquantia AQC107 chipset) whereas the second one uses the onboard NIC on my motherboard (Intel I225-V chipset).

This is consistent across two devices that have 10Gbps ports and two devices that have 2.5Gbps ports.

I'm using an AdTran 622v ONT provided by my internet provider, a TP-Link ER8411 router, and a MikroTik CRS312-4C+8XG-RM switch. I'm using CAT6 cabling, except for the connection between the router and the switch which uses an SFP+ DAC cable.

I haven't been able to figure it out. The 'slower' speeds are still great, I just don't understand why it can't achieve more than 1.5Gbps down over a 2.5Gbps network connection.

Any ideas?

  • Lunchbox05@lemm.ee
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    Something to keep in mind when testing upload and download speeds is your drive and memory read/write speed. Your true throughput is not just a test of NIC and network but also the rest of your PC

    • dan@upvote.auOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      The PC can definitely handle it since both tests were done on the same PC, just a different NIC.

      Ookla’s speed test doesn’t write to or read from disk, so disk performance doesn’t impact it :)

      • Lunchbox05@lemm.ee
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Cool, if you ruled that out then last thing I would do is run Wireshark during both tests and see how they compare